null

3ST-60CC-B10: 3-inch steel arrowhead with 60-inch cable and cable clamps - Set of 10 plus drive rod

Item #:
3ST-60CC-B10
( 1 ) Add Review
$168.59
High holding power
Installs with T-handle or impact wrench
Works in dense sand & gravel
Suitable for temporary and permanent use

Product Overview

Set of 10) 3" steel arrowhead anchors with 1/8" x 60" galvanized aircraft cable with 3) cable clamps per anchor plus 3-ft drive rod installation

Specification

Type
Kits
Material
Zinc Coated 11 Gauge Steel
Part
3ST-60CC-B10
Ultimate Holding (vertical)
2,000 lbs*
Cable Size
1/8" Galvanized Aircraft Cable
Breaking Strength
2,000 lbs
Anchor Size
3"
Attachment Type
Cable Clamps
Cable Length
60"
Drive Rod
1/2" Round Smooth Steel DR-3ST
*Technical Products, Inc. (TPI) conducted instrumented pull tests on all products provided to us in a Class 2/3 Soil (medium sand/gravel). After the anchor was installed as per instructions an increasing load was applied orthogonal to the long axis of the anchor until the anchor failed as demonstrated by a sudden decrease in load bearing capacity. Each anchor was tested three times and results averaged. The test results are summarized in the table below. It is our professional opinion that in more cohesive and dense or better compacted soils this load bearing capacity will increase.

Frequently Bought Together

Product Reviews

  • 5
    Great anchors

    Posted by undefined on April 12, 2022

    I'm in Houston, we have clay soil that can be very difficult to work with. The anchors worked well once we got them drive, but ended up bending the rod, and using 3/4" rebar instead. My SDS plus demo hammer wasn't enough to effectively drive through the clay past a foot or two and resorted to a 2# sledge. These were perfect for securing furniture in paved patio. I suspect the challenges were unique to our local soil conditions.

Write a Review