PE10: 10-inch Penetrator with 1-inch hex head
Product Overview
10" Penetrator anchor with 1" hex head.
Typically used to secure tents, canopies, RV awnings, dogs, inflatables, beach items, soccer goals, swing sets, trampolines, deer stands and hunting blinds, picnic tables, outdoor sculptures, small aircraft, greenhouses, and domes. For temporary and permanent structures. Easy to install and remove.
Typically used to secure tents, canopies, RV awnings, dogs, inflatables, beach items, soccer goals, swing sets, trampolines, deer stands and hunting blinds, picnic tables, outdoor sculptures, small aircraft, greenhouses, and domes. For temporary and permanent structures. Easy to install and remove.
Specification
Type
Penetrator
Length
10"
Head
1" Hex
Flange
2"
Flights
1-3/4"
Weight
1
Material
356 Aluminum
Part
PE10
Ultimate Holding (vertical)
1,000 lbs*
*Technical Products, Inc. (TPI) conducted instrumented pull tests on all products provided to us in a Class 2/3 Soil (medium sand/gravel). After the anchor was installed as per instructions an increasing load was applied orthogonal to the long axis of the anchor until the anchor failed as demonstrated by a sudden decrease in load bearing capacity. Each anchor was tested three times and results averaged. The test results are summarized in the table below. It is our professional opinion that in more cohesive and dense or better compacted soils this load bearing capacity will increase.
