PE9: 9-inch Penetrator with hex head
Product Overview
9" aluminum anchor with 3/4" hex head.
Typically used to secure tents, canopies, RV awnings, dogs, inflatables, and light-duty, temporary structures. Easier to install and remove than tent stakes, with no tools required.
Specification
Type
Penetrator
Length
9"
Head
3/4" Hex
Flange
1-3/4"
Flights
1-1/8"
Weight
1 lb
Material
356 Aluminum
Part
PE9
Ultimate Holding (vertical)
400 lbs*
Install Socket Size
3/4" Socket
Pre-Drill
3/4" Hole
Heat Treat
T6
*Technical Products, Inc. (TPI) conducted instrumented pull tests on all products provided to us in a Class 2/3 Soil (medium sand/gravel). After the anchor was installed as per instructions an increasing load was applied orthogonal to the long axis of the anchor until the anchor failed as demonstrated by a sudden decrease in load bearing capacity. Each anchor was tested three times and results averaged. The test results are summarized in the table below. It is our professional opinion that in more cohesive and dense or better compacted soils this load bearing capacity will increase.
