Shed Anchor Kit - Steel Arrowhead
Product Overview
Anchor kit for securing sheds, shelters, greenhouses, and farm buildings contains eight (8) 3" steel arrowhead anchors, each with a 60" cable and three (3) cable clamps per anchor with a 30-inch drive rod for installation. Each anchor can hold up to 2,000 lbs.
Specification
Type
Kits
Material
Zinc Coated 11 Gauge Steel
Part
3ST-60CC-B8
Ultimate Holding (vertical)
2,000 lbs*
Cable Size
1/8" Galvanized Aircraft Cable
Breaking Strength
2,000 lbs
Anchor Size
3"
Attachment Type
Cable Clamps
Cable Length
60"
Drive Rod
1/2" Round Smooth Steel DR-3ST
*Technical Products, Inc. (TPI) conducted instrumented pull tests on all products provided to us in a Class 2/3 Soil (medium sand/gravel). After the anchor was installed as per instructions an increasing load was applied orthogonal to the long axis of the anchor until the anchor failed as demonstrated by a sudden decrease in load bearing capacity. Each anchor was tested three times and results averaged. The test results are summarized in the table below. It is our professional opinion that in more cohesive and dense or better compacted soils this load bearing capacity will increase.
