10AL-72CC: 10-inch aluminum arrowhead with 72-inch cable and cable clamps
- Product Overview
Product Overview
10" Aluminum arrowhead anchor with 3/8" x 72" galvanized aircraft cable & 3) cable clamps
Type
Arrowheads
Material
356 Aluminum
Part
10AL-72CC
Ultimate Holding (vertical)
14,400 lbs*
Cable Size
3/8" Galvanized Aircraft Cable
Breaking Strength
14,400 lbs
Anchor Size
10"
Attachment Type
Cable Clamps
Cable Length
72"
Drive Rod
1" Round Smooth Steel with hole for pin on anchor
*Technical Products, Inc. (TPI) conducted instrumented pull tests on all products provided to us in a Class 2/3 Soil (medium sand/gravel). After the anchor was installed as per instructions an increasing load was applied orthogonal to the long axis of the anchor until the anchor failed as demonstrated by a sudden decrease in load bearing capacity. Each anchor was tested three times and results averaged. The test results are summarized in the table below. It is our professional opinion that in more cohesive and dense or better compacted soils this load bearing capacity will increase.