PE-Swing24: 2x4, 2x6 Bracket
Product Overview
11 Gauge galvanized steel bracket to hold down 2x4 or 2x6 (1.5" x 3.5" or 1.5" x 5.5" Nominal) on edge. For use with PE10, PE18, PE18SQ and PE26 Penetrators
Specification
Type
Accessories
Material
11 Gauge Galvanized Steel
Part
PE-Swing24
Works With
9" Penetrators
Dimensions
5.75" Tall X 3" Wide
Mounting Holes
2) 3/8"
*Technical Products, Inc. (TPI) conducted instrumented pull tests on all products provided to us in a Class 2/3 Soil (medium sand/gravel). After the anchor was installed as per instructions an increasing load was applied orthogonal to the long axis of the anchor until the anchor failed as demonstrated by a sudden decrease in load bearing capacity. Each anchor was tested three times and results averaged. The test results are summarized in the table below. It is our professional opinion that in more cohesive and dense or better compacted soils this load bearing capacity will increase.