4AL-48TH: 4-inch aluminum arrowhead with 48-inch cable and thimble loop
- Product Overview
Product Overview
4" Aluminum arrowhead anchor with 3/16" x 48" galvanized aircraft cable with thimble loop
Type
Arrowheads
Material
356 Aluminum
Part
4AL-48TH
Ultimate Holding (vertical)
3,500 lbs*
Cable Size
3/16" Galvanized Aircraft Cable
Breaking Strength
4,200 lbs
Anchor Size
4"
Attachment Type
Thimble
Cable Length
48"
Drive Rod
3/4" Round Smooth Steel with hole for pin on anchor
*Technical Products, Inc. (TPI) conducted instrumented pull tests on all products provided to us in a Class 2/3 Soil (medium sand/gravel). After the anchor was installed as per instructions an increasing load was applied orthogonal to the long axis of the anchor until the anchor failed as demonstrated by a sudden decrease in load bearing capacity. Each anchor was tested three times and results averaged. The test results are summarized in the table below. It is our professional opinion that in more cohesive and dense or better compacted soils this load bearing capacity will increase.