4ALB-48TH-B10: 4-inch Aluminum bullet with 48-inch cable and thimble loop - Set of 10 plus drive rod
- Product Overview
Product Overview
Set of 10) 4" aluminum bullet anchors with 3/16" x 48" galvanized aircraft cable with thimble loop and 3-ft drive rod for installation
Type
Bullets
Material
356 Aluminum
Part
4ALB-48TH-B10
Heat Treat
T6
Cable Size
3/16" Galvanized Aircraft Cable
Breaking Strength
4,200 lbs
Anchor Size
4"
Attachment Type
Thimble Loop
Cable Length
48"
Drive Rod
3/4" Smooth Round Steel (DR-6ST)
*Technical Products, Inc. (TPI) conducted instrumented pull tests on all products provided to us in a Class 2/3 Soil (medium sand/gravel). After the anchor was installed as per instructions an increasing load was applied orthogonal to the long axis of the anchor until the anchor failed as demonstrated by a sudden decrease in load bearing capacity. Each anchor was tested three times and results averaged. The test results are summarized in the table below. It is our professional opinion that in more cohesive and dense or better compacted soils this load bearing capacity will increase.