PE-66V: Small Penetrator "U" bracket for securing 6x6 (Nominal) lumber vertically
- Product Overview
Product Overview
11 Gauge galvanized steel "U" bracket for 6x6 (Nominal) vertical lumber for small Penetrators. For use with PE10, PE18, PE18SQ and PE26 Penetrator earth anchors
For bracing and structure support applications, check out this Penetrator installation video on YouTube showing the PE46-Hex and the PE46-44V bracket holding 4x4 lumber.
Type
Accessories
Material
11 Gauge Galvanized Steel
Part
PE-66V/H
Works With
10", 18" & 26" Penetrators
Dimensions
5.375" Tall X 5.25" Wide
Mounting Holes
4) 3/8"
*Technical Products, Inc. (TPI) conducted instrumented pull tests on all products provided to us in a Class 2/3 Soil (medium sand/gravel). After the anchor was installed as per instructions an increasing load was applied orthogonal to the long axis of the anchor until the anchor failed as demonstrated by a sudden decrease in load bearing capacity. Each anchor was tested three times and results averaged. The test results are summarized in the table below. It is our professional opinion that in more cohesive and dense or better compacted soils this load bearing capacity will increase.
