PE18: 18-inch Penetrator with 1-inch hex head
Product Overview
18" Penetrator anchor with 1" hex head.
Typically used to secure antennas, portable buildings and storage containers, sheds, trellis, fish cages, soccer goals, inflatables, trampolines, tents, canopies, RV awnings, dogs, deer stands and hunting blinds, picnic tables, outdoor sculptures, beach kites, small aircraft, greenhouses, domes, carports, shelters, generators, and air conditioners. Meets military specs. For temporary and permanent structures. Easy to install and remove.
Typically used to secure antennas, portable buildings and storage containers, sheds, trellis, fish cages, soccer goals, inflatables, trampolines, tents, canopies, RV awnings, dogs, deer stands and hunting blinds, picnic tables, outdoor sculptures, beach kites, small aircraft, greenhouses, domes, carports, shelters, generators, and air conditioners. Meets military specs. For temporary and permanent structures. Easy to install and remove.
Specification
Type
Penetrator
Length
18"
Head
1" Hex
Flange
2"
Flights
1-3/4"
Weight
1.5 lbs
Material
356 Aluminum
Part
PE18
Ultimate Holding (vertical)
2,500 lbs*
Laterial Holding
510 lbs*
*Technical Products, Inc. (TPI) conducted instrumented pull tests on all products provided to us in a Class 2/3 Soil (medium sand/gravel). After the anchor was installed as per instructions an increasing load was applied orthogonal to the long axis of the anchor until the anchor failed as demonstrated by a sudden decrease in load bearing capacity. Each anchor was tested three times and results averaged. The test results are summarized in the table below. It is our professional opinion that in more cohesive and dense or better compacted soils this load bearing capacity will increase.
