PE36-Hex: 36-inch Penetrator with 2-inch hex head
- Product Overview
Product Overview
36" Penetrator anchor with 2" hex head.
The PE36-Hex can be used as a lower-cost alternative to the PE46 for lighter load capacity applications.
Typically used to secure solar ground mount installations, temporary shelters, ziplines, outdoor sculptures, deer stands, duck blinds, shade sails, event tents, large canopies, towers, utility poles, deck footings, portable buildings, storage containers, beach items in sand, large inflatables, small aircraft, fish cages, sheds, tanks, docks, tree guying, greenhouses, domes, antennas, and can be used to replace concrete footings.
Type
Penetrator
Length
36"
Head
2" Hex
Flange
4"
Flights
3"
Weight
9 lbs
Material
356 Aluminum
Part
PE46-Guy
Ultimate Holding (vertical)
8,400 lbs*
Lateral Holding
1,520 lbs*
Base Plate Hole
2-1/2"
*Technical Products, Inc. (TPI) conducted instrumented pull tests on all products provided to us in a Class 2/3 Soil (medium sand/gravel). After the anchor was installed as per instructions an increasing load was applied orthogonal to the long axis of the anchor until the anchor failed as demonstrated by a sudden decrease in load bearing capacity. Each anchor was tested three times and results averaged. The test results are summarized in the table below. It is our professional opinion that in more cohesive and dense or better compacted soils this load bearing capacity will increase.
