PE46-Flat: 46-inch Penetrator with 3.5-inch flat hex head
- Product Overview
Product Overview
46" Penetrator anchor with 3.5" flat hex head.
Typically used to secure solar ground mount installations, temporary shelters, ziplines, outdoor sculptures, deer stands, duck blinds, shade sails, event tents, large canopies, towers, utility poles, deck footings, portable buildings, storage containers, beach items in sand, large inflatables, small aircraft, fish cages, sheds, tanks, docks, tree guying, greenhouses, domes, antennas, and to replace concrete footings.
Typically used to secure solar ground mount installations, temporary shelters, ziplines, outdoor sculptures, deer stands, duck blinds, shade sails, event tents, large canopies, towers, utility poles, deck footings, portable buildings, storage containers, beach items in sand, large inflatables, small aircraft, fish cages, sheds, tanks, docks, tree guying, greenhouses, domes, antennas, and to replace concrete footings.
Type
Penetrator
Length
46"
Head
3.5" Flat
Flange
3.5"
Flights
3"
Weight
11 lbs
Material
356 Aluminum
Part
PE46-Flat
Ultimate Holding (vertical)
14,000lbs. *
Lateral Holding
950 lbs.*
Mounting Holes
1) 3/4 10-Thread"
Base Plate Hole
2-1/2"
*Technical Products, Inc. (TPI) conducted instrumented pull tests on all products provided to us in a Class 2/3 Soil (medium sand/gravel). After the anchor was installed as per instructions an increasing load was applied orthogonal to the long axis of the anchor until the anchor failed as demonstrated by a sudden decrease in load bearing capacity. Each anchor was tested three times and results averaged. The test results are summarized in the table below. It is our professional opinion that in more cohesive and dense or better compacted soils this load bearing capacity will increase.
